lmacmil to Smoove910 Member 2009-Oct-4 9:27 am to Smoove910said by Smoove910:What happens The only configurations I do is at POST when I press f4 to enter the cards Configuration Utility. One IDE harddrive with IDE CDROM as slave and SATA DVD set to "native IDE" in the BIOS.The BIOS options for boot order show hard disk and CDROM (plus all the
Home > Cannot Boot > Cannot Boot From Sata Cd Drive ross7 Member 2009-Oct-5 6:32 pm said by lmacmil:said by ross7:I guess you have Tangled Mess [VerizonFiOS] by anon213.
Cannot Boot From Sata Cd Drive
Report • #6 ishoboy January 15, 2009 at 09:17:36 300W PSU. Hello Colin.Imaging IDE to SATA will work if SATA drivers are installed on IDE drive first.This is an nVidia chipset board, so no F6 drivers are required for non-RAID SATA drives What do you think? Report • #2 ishoboy January 14, 2009 at 11:06:11 Yes i can boot with IDE drive while SATA drive is connected.I can boot with CDrom when IDE drives are attached. this contact form
Turned out to be my keyboard. The Red wire of the IDE data cable is oriented to pin #1 of the on-board IDE header, and to the power cable connector end of the IDE connector (pin #1) Report • #7 OtheHill January 15, 2009 at 09:33:49 I am speculating. Thanks again! http://www.tomshardware.com/forum/250291-32-booting-sata-drive
Results 1 to 11 of 11 Thread: SATA DVD drive won't boot any CD Thread Tools Show Printable Version Search Thread Advanced Search Display Linear Mode Switch to Hybrid Mode You should have the CD rom on it's own channel. · actions · 2009-Oct-3 3:18 pm · lmacmiljoin:2001-01-26South Bend, IN lmacmil to ross7 Member 2009-Oct-3 3:38 pm to ross7said by Also it boots when I have 2-3 IDE drives and the CDrom. So the question you have to ask yourself is this: "If I connect an eSATA or PATA drive, 12 to 18 months or more in the future, and it doesn't work,
Yes, my password is: Forgot your password? Report • #8 ishoboy January 15, 2009 at 21:57:47 Using a PS/2 KBwhen the SATA is attached it would just say "PRESS A KEY TO REBOOT". Also, for the maximum benefit of SATA devices, set them to AHCI which is Advanced Host Controller Interface. some boards aren't capable of booting from a windows cd.
You may have to register before you can post: click the register link above to proceed. I know that with an add-in card that's std operating procedure - at least the old stuff I have. Yes its an internal drive. http://www.sevenforums.com/hardware-devices/168368-sata-dvd-not-bootable-bios.html Aug 26, 2009 at 10:38 AM #9 twilyth Guest Mussels said: ↑ some motherboards come with more than one SATA controller.
What does happen when you can't boot to the CD drive? I been workin on this all morning. What are we missing & what do we need to do to be able to boot from these drives? If so how?
After the reboot, no problem, the harddrive showed up, and xp loaded right up http://forums.pcper.com/trading.php TRADING RULEZ!! http://www.techpowerup.com/forums/threads/cant-boot-from-dvd-drive.102430/ Dyson vacuum ruining carpets or not good for carpet warranty [HomeImprovement] by HBuilder328239. It doesn't really matter which one, as each SATA device is a "master", and I only specified SATA2-0 so we would be talking apples to apples when discussing the various drives My PSU is PC Power & Cooling Silencer PPCS910 910W ATX12V 2.2 http://www.newegg.com/Product/.....6817703022 My boot sequence was CDROM:P1-HL-DT-ST then WDC WD3000HLF and Disabled Then I tried just having CDROM:P1-HL-DT-ST and disabling
Report • #12 ishoboy January 16, 2009 at 16:46:18 I'm not using SATA/IDE mobo. weblink System Specs System Name: SLLI (pronounced "Silly") Processor: i7 3770k @ 4.5GHz (1.25v, delidded IHS) Motherboard: Asrock Z77 Extreme 4 Cooling: Corsair H80 (2x120mm Fractal fans. It's a 2 or 3 year old MS ComfortCurve keyboard. · actions · 2009-Oct-5 4:47 pm · ross7join:2000-08-16
Server OS recommendation [Networking] by Frank_IT183. Reports: · Posted 7 years ago Top SamDenst Posts: 10 This post has been reported. Hit a whole bunch of keys the next time and one of them took and it booted from the SATA DVD drive just like it was supposed to. · actions · navigate here Operating Systems ▼ Windows 10 Windows 8 Windows 7 Windows XP See More...
That is why that option is there. Make sure your CD is set to BOOT. So if I disable the Controller, the Marvell Storage Boot ROM automatically disappears and is not an option any more.
RAID is against my religion though so I guess I didn't make the connection.
Jmicron is bootable, but you need to enable it in the bios iirc only reason I know is cause when its enabled it takes longer to boot and I have to Make sure you have a good 80-wire/40-pin IDE cable. · actions · 2009-Oct-3 7:51 pm · lmacmiljoin:2001-01-26South Bend, IN
You're right. Insert the RAID driver disk that came with your motherboard. 1- Go into integrated peripherals. 2- Go into OnCHIP PCI Device 3- Make sure your Serial ATA controller is enabled. 4- I removed the CDROM and re-connected the SATA cable to SATA2_4 (SATA port 5). his comment is here If so, the DVD drive will be listed as a separate device in the list of available boot devices, not as "CDROM".
Report • #11 OtheHill January 16, 2009 at 13:55:55 With SATA/IDE motherboards there is another setting to choose WHICH hard drive you want to boot to. This enables advanced features of the SATA spec. No I did not update the BIOS yet. they dont show in the BIOS, they have their own menu/POST screen after the main one.Click to expand...
EG, my board has 6 intel (bootable) and 2 JMICRON (not bootable)Click to expand... I didn't see a power supply listed above -- what kind do you have? You skipped a step in your explanation. ASUS M3A78 & a 9850 Reply With Quote 07-26-2008,08:49 PM #11 Sick Willie View Profile View Forum Posts Classic Misanthropist Joined Nov 2001 Location I've moved.....I'm over here now.
Thanks to all for your helpful suggestions. Broadband Subscribers Sees Decline Opposition to AT&T, Time Warner Merger is Fast and Fierce Report: AT&T Is Spying on Americans For ProfitMost Active Forum Topics this week604.