Home > Cannot Boot > Cannot Boot From Sata Cdrom

Cannot Boot From Sata Cdrom

You can always add the CD/ROM drive back into the system after you have Windows installed, and working.Good luck! · actions · 2009-Oct-5 3:12 pm · ross7 ross7 to lmacmil Member Hardware & Devices after change to SATA AHCI mode in BIOS the drive shows removableSo after I changed to SATA AHCI mode in the BIOS, the main boot internal hard drive Reports: · Posted 7 years ago Top Topic Closed This topic has been closed to new replies. How the MacBook Pro's Touch Bar works The MacBook Pro now has a digital function bar that's actually a dynamic screen. http://electrictricycle.net/cannot-boot/cannot-boot-from-cdrom-code-4.html

Sam, thanks for the kind words. Thanks, Bill __________________ AIDA64 | Power supply info | Memtest86+ | Everest 07-01-2008, 02:33 AM #3 vladimirb Registered User Join Date: Mar 2008 Location: Banja Luka, Serb Republic ForumsJoin Search similar:[XPPro] HP Desktop: POST but will not bootI just rebuilt my computer but have some questions.[WIN8] windows 8 hosed my hard drive?Can't find 3-way SATA cordInto the Twilight Zone Were you looking for it on the main (standard?) bios page or in the HDD section or boot sequence section?

The primary storage controller is the Intel ICH10R, which handles SATA 1-6. From what I see in the manual, this board is not one of them. I have seen people setting it to SATA and complaining that they are unable to boot. Boot sequence in BIOS is CDrom first, Removable device [disabled], IDE hard drive [disabled], Other boot device [disabled].

EG, my board has 6 intel (bootable) and 2 JMICRON (not bootable) Jmatt110 says thanks. So if you are seeing the same results with the HDD and DVD in 1 & 2, 1 & 3, or 1 & 5, then that is further proof that this Check your IDE cable to determine it is good; e.g., test it on another system. When I change the mode back to IDE from AHCI I boot from the CD/DVD drive just fine.

One says Client MAC ADDR:002618086AF2, then GHID and some more numbers and then DHCP.....and a curser that blinks from / to \ and will sit there for 20 seconds or so The IDE hard disk and CDROM are master 0 and slave 0.I will try your suggestion of having CDROM as both 1st and 2nd boot devices. I did have legacy USB devices enabled but that didn't make it work. see it here You're right.

Discussion topics include choosing a processor, installing hard drives, adding RAM, upgrading video cards, sound cards, DVD drives, Blu-ray drives, PSU, and much more.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion can't boot Thanks allot for your reply though. The BIOS should have auto-determined the keyboard type anyway, so maybe your keyboard is flakey? Thanks for anyone who can help.

Report • #5 OtheHill January 15, 2009 at 04:22:00 What PSU is in the computer? http://www.dslreports.com/forum/r23125039-optical-Can-t-boot-from-SATA-DVD-drive If you choose [Auto], the BIOS determines the type of device, and its characteristics. [Auto] is the preferred setting. Some of the things you have asked me are actually specified on the original post.. The IDE hard disk and CDROM are master 0 and slave 0.I will try your suggestion of having CDROM as both 1st and 2nd boot devices.

I don't see anything in the BIOS that is related to the card. http://electrictricycle.net/cannot-boot/cannot-boot-from-cdrom-solaris-10.html If you look at the manual, page 71 section 3.1, there are several ways to update the BIOS. I will mark this thread as resolved. What do you think?

Because that wouldn't make the system boot from the DVD drive (unless the controller is in Native IDE mode). Reports: · Posted 7 years ago Top SamDenst Posts: 10 This post has been reported. Yes, you are correct, I have no IDE devices. his comment is here it is sata, the hd is ide.

This has never caused a problem for me. · actions · 2009-Oct-3 3:38 pm · Smoove910Premium Memberjoin:2005-08-01Nampa, ID

Smoove910 to lmacmil Premium Member 2009-Oct-3 3:49 pm to lmacmilWhat happens if you Updating Windows 8.1 » Site Navigation » Forum> User CP> FAQ> Support.Me> Steam Error 118>> Trusteer Endpoint Protection All times are GMT -7. Either something with the drive, or another BIOS setting (AHCI compatibility mode, maybe?) 0Votes Share Flag Collapse - AH HA not that's important here is your answer by OH Smeg ·

Do you live in Bermuda? · actions · 2009-Oct-5 3:43 pm · lmacmiljoin:2001-01-26South Bend, IN

lmacmil Member 2009-Oct-5 4:47 pm said by ross7:I guess you have an USB keyboard, but don't

Many SATA II drives have a jumper on them to throttle the speeds to SATA I. A system that can't boot from a SATA CD/DVD is flawed somehow. If you leave the BIOS set at its default value of [None] for each IDE device, it will assume NO DEVICE is connected to that channel/position. Report • #2 ishoboy January 14, 2009 at 11:06:11 Yes i can boot with IDE drive while SATA drive is connected.I can boot with CDrom when IDE drives are attached.

I have connected and disconnected each drives and it is only when the SATA is attached that I can't boot from CDrom.SATA drive and controller have both been used together on If you wanted to get rid of this message, you could disable the Marvell Storage ROM in the BIOS, but keep in mind that this will prevent booting from a PATA/IDE Hardware ALL How-tos Win 10 Win 8 Win 7 Win XP Win Vista Win 95/98 Win NT Win Me Win 2000 Win 2012 Win 2008 Win 2003 Win 3.1 E-Home Office weblink When all three drives are properly set up and working, set the boot order to boot from the optical devices first and second, before the HDD.9) Check to see if your

The SATA mode is set to IDE instead of AHCI or RAID and now of course, I can't... Otherwise, read the manual to see which hotkey during POST brings up the boot menu that lets you select which device to boot from. LG Black Blu-ray/HD DVD-ROM & 16X DVD±R DVD Burner SATA Model GGC-H20L http://www.newegg.com/Product/.....6827136133 Reports: · Posted 7 years ago Top ScottW Posts: 6609 This post has been reported.