Home > Windows 7 > Cannot Connect To Network Computers Windows 7

Cannot Connect To Network Computers Windows 7


depending on how you pc is set up. i have done everyting aabove…….still the box shows ‘creat home group where it should say ‘join group'…….what should i do?? In the command prompt window that opens, type type the following commands: PING each remote computer by IP address, and if successful, PING by name. After all this, my Homegroup worked! http://electrictricycle.net/windows-7/cannot-connect-network-computers-windows-7.html

I had homegroup working just fine. The first 2 cpus are still working well. I have checked all the setting stated above, but cannot get it to work. Ok so none of the above yielded any luck. http://windows.microsoft.com/en-ca/windows/cant-connect-to-network

Connecting To Another Computer On My Network Windows 7

From the generated ip addresses you have to choose the so-called IPv4-mapped address, this is an address starting with ::FFFF: , generally ::FFFF:C0A8: when you use home network IP4v adresses like How do I get it to see it as a Home Network? CLOSE Home Software Bios BSOD Blue Screen Drivers Internet Errors Operating system Sound & Audio USB Disk Hardware Assembly/Disassembly Battery Display Graphic Card Harddisk MOTHERBOARD PSU RAM Networking Desk's Technical Support Open the same file in your second computer and type in the same data and save.

alternate using a bach file (included in attached file) Also need to install this patch from microsoft. I set up Sharing to be identical for all shared folders, then, I found some folders could share and others would show but you couldnt explore them (no permissions message popup). share|improve this answer edited Mar 15 '15 at 7:03 answered May 20 '13 at 6:43 Eliko 1314 add a comment| up vote 1 down vote Here is how I was able Window Cannot Access Network Windows 7 The time now is 08:38.

The wireless laptop will not connect. At my wits end ill tell ya. What is odd is that the wireless connected laptop is on network "RexCity" and the desktop is on "Network 2," but they have the same Ipconfig 192.168.1.x. Router is an Thread Tools Search this Thread 04-08-2009, 09:30 PM #1 akwebb Registered Member Join Date: Mar 2009 Posts: 7 OS: Vista Ultimate I can connect to

Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the Windows Cannot Access Network Share Windows 7 I can connect if my security setting/ WEP is disabled. I am not sure exactly what step fixed it. share|improve this answer answered Oct 26 at 6:57 TeleComputers 1 add a comment| up vote 0 down vote For me all up stated did not work and i found some different

Can't Connect To Computer On Network Windows 10

I can ping the machine. http://www.tomshardware.com/forum/38750-42-connect-network-computer Click on the file in this folder named hosts, and open the file with a text editor such as Notepad. Connecting To Another Computer On My Network Windows 7 If I try from the destination to the source, I have the same problem. Cannot Connect To Other Computers On Network Windows 10 Is there an app that can do this better?

https://support.microsoft.com/en-us/kb/980486 Include Patch from Microsoft, 6to4 Adopter remover and batchfile. useful reference sherry retzlaff says: 5 years ago I have tried everything you suggest above to connect to HG. The machine is on the same subnet My friend with the exact same laptop as me (and on the same network, same workgroup) can connect to the shared folder. I have 5 PCs in my network and all can access the four drives. You Don't Have Permission To Access Windows 7 Sharing

goto my network places via my computor or how ever you do it. The server is not configured for transactions." All other computers on the network are working fine and can share files fine. your going to get a permission notice "your about to connect to a printer "printer name" which will automatically install aprint driver on your machine.... my review here If it’s set to anything else like FF, IPv6 was turned off.

I've got two hard drives on the den computer, C: and F:. Windows Cannot Access Network Share You Do Not Have Permission Then I added four rules to open up the ports described in http://technet.microsoft.com/en-us/library/ee6171…. Is something missing?

click on the "Authentication" tab6.

The problem exists in both directions. zoulas says: 7 years ago I have a homegroup setup and working, but when I try and play mp3 files the client computer hangs for a good minute. View Full Profile → Find Something ? Windows 7 Cannot Access Network Share My System Specs You need to have JavaScript enabled so that you can use this ...

When I go to network and sharing center, I can see the option: "HomeGroup: Ready to Create" but I do not see an option to join. Keith Willey says: 5 years ago My desktop recognizes my homegroup laptop, but my laptop does not recognize my desktop. hvitie says: 7 years ago I use F-Secure Internet Security 2010. get redirected here I don't want security setting disabled though.

Computer Type PC/Desktop System Manufacturer/Model Number I built the system OS Windows 10 Pro 64-bit CPU AMD Phenom II X6 1090T Motherboard ASRock 990FX Extreme9 (CPUSocket) Memory 16GB Graphics Card NVIDIA It should be on by default, but if someone changed your settings, this could also cause the problem. It doesnt matter if I view/sort by artist, album, etc. Mr.Green says: 6 years ago I have three computers.

You can open a command prompt as described above and type the following command: nbtstat -n. Make sure the value is set to 0. The other is a 64bit box running RTM. any and all help is appreciated Thanks Colin says: 5 years ago HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpip6Parameters In the right pane, right-click on DisabledComponents and select Modify.

To do right click on Computer icon, Properties, Advanced system settings, Computer name, Change; then restart the device. J. I am able to see that there is a Homegroup available and the HG window even tells me which laptop created it. Then, I did the following: At, Control Panel \ All Control Panel Items \ System I selected: "Computer Name" tab.

I have never paid attention till lately when i tried to make my own network, i do not get the option to select home/work/public/domain. Click on “everyone”. I've disabled my firewall on both computers and nothing. So I have my own IPv6 network.

Hey presto, all sorted. . . Both of my computers connect individually and give me their own password, but neither sees the other so I don't get the opportunity to enter the password. Now you can able to read and write the files on that drive after this configuration and you can see the difference below: Still Finding Solution or Need Some Help ? The two computers are brand new Windows 7 HP Laptops, set up on a DLink wireless router, through the router configured as an ‘Access Point.' Brian says: 5 years ago I'm

WTF? The XP machine can see and access... I also have a Windows Home Server on the network. I've been trying for about 3 days now.